Should I replace 1-2 and 2-3 accumulator with spring?
#1
Should I replace 1-2 and 2-3 accumulator with spring?
2000 Ford F150 V8 XLT ..automatic with about 200k miles
Overdrive servo had problem so I removed pan and replaced overdrive servo (snap ring) and when I removed pan and valve body I found that 2-3 accumulator spring was broken...when I dropped valve body ..broken spring along with cover just fell on ground... ...2-3 piston looked fine.....so should I change piston or just spring?
and nothing wrong with 1-2 accumulator ...as snap ring is holding it fine....and before I took all this apart ...transmission was shifting fine accept that overdrive problem(it wont go pass 40 mph if its in overdrive)
SO JUST TO CLARIFY ...ONLY THING BROKEN CURRENTLY IS 2-3 ACCUMULATOR SPRING ...
Its not only money but ..I heard that if it ain't broke don't replace it.
So please advise...
Overdrive servo had problem so I removed pan and replaced overdrive servo (snap ring) and when I removed pan and valve body I found that 2-3 accumulator spring was broken...when I dropped valve body ..broken spring along with cover just fell on ground... ...2-3 piston looked fine.....so should I change piston or just spring?
and nothing wrong with 1-2 accumulator ...as snap ring is holding it fine....and before I took all this apart ...transmission was shifting fine accept that overdrive problem(it wont go pass 40 mph if its in overdrive)
SO JUST TO CLARIFY ...ONLY THING BROKEN CURRENTLY IS 2-3 ACCUMULATOR SPRING ...
Its not only money but ..I heard that if it ain't broke don't replace it.
So please advise...
Thread
Thread Starter
Forum
Replies
Last Post
Monty_quest13
1997 - 2003 Ford F150
0
01-11-2014 07:23 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)