Keyless entry code
#1
Keyless entry code
Hey guys, can anyone tell me how to get the rear seat off so I can find the code to change to one of my own. I bought the truck used and they did not have a code for the keyless entry. This is on an '05 FX4.
Thanks
Mike
Thanks
Mike
#2
Give this a try...
1. Just remove the top of the center seat belt tower. You should be able to see what needs to be done once you are looking at it.
2. Stick a screw driver beside one of the two latches on the seat bottom each side of the truck and aim toward the roof. Push forward. Your screw driver will slide in the access hole (it may take you a couple of tries). Once you feel the screw driver stop, push hard. At the same time take your free arm and push the seat down (not very much effort is required) Keep pushing the screw driver,....you will feel a little movement. When you feel the movement, quickly grab the bottom of the seat and lift up. One side is done! Then.....do the other.
1. Just remove the top of the center seat belt tower. You should be able to see what needs to be done once you are looking at it.
2. Stick a screw driver beside one of the two latches on the seat bottom each side of the truck and aim toward the roof. Push forward. Your screw driver will slide in the access hole (it may take you a couple of tries). Once you feel the screw driver stop, push hard. At the same time take your free arm and push the seat down (not very much effort is required) Keep pushing the screw driver,....you will feel a little movement. When you feel the movement, quickly grab the bottom of the seat and lift up. One side is done! Then.....do the other.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)