2011 Ford F150 Wiring Diagram for Alarm or Remote Starter
 

I purchased the 2011 wiring diagram for the install of an aftermarket alarm and/or remote start if anyone needs it.

The 2010 is slightly different in terms of wire colors so don't try to use it unless you plan on testing every pin with a DMM to find what your looking for.

https://www.f150-forums.com/attachme...ine=1322533704
https://www.f150-forums.com/attachme...ine=1322533704
https://www.f150-forums.com/attachme...ine=1322533704
https://www.f150-forums.com/attachme...ine=1322533704

https://www.f150-forums.com/attachme...ine=1322533704
https://www.f150-forums.com/attachme...ine=1322533704
https://www.f150-forums.com/attachme...ine=1322533704
https://www.f150-forums.com/attachme...ine=1322533704

stuck the thread and +1 props from me!

Thank you sir!

I ended up having to do some additional wiring to get past the negative door triggers but other then that it was fairly straight forward.

I can also confirm the XPRESSKIT PKTX Ford 40 80 Bit Encrypted Bypass works perfect to get past the 80 bit SA key for remote start. This bypass also arms and disarms the factory alarm automatically on lock and unlock if you have it.

I installed the Viper 5901 in mine and it works great. I bought an additional 80 bit key off ebay w/o the keyless buttons to get rid of the bulky ford key. The LED viper remote displays the lock status on the remote and covers all functions of the truck and alarm.

Have a safe New year.
Jess

Thanks a lot for the wire listings. I'm going to be installing an Avital 5305L starter/alarm into my 2011 F150. Any advice?