wagonburner34

so today I installed a new led top rear brake light assembly. When I went to check for proper operation before securing an sealing the light up I ran into some issues. 1st only the right side white leds worked and the brake leds. The left set of white leds didn't work. But worked with the bulbs. So after 30 seconds the white leds shut of an wouldnt turn back on. So here's the kicker. Now I lost my power windows and my odometer! I have checked the fuses with a test light an nothing is burnt out. I swapped the relays to see if a relay went bad and nothing changed. Same problems were still there. Only thing I can think of is the 30 amp circuit breaker but have to wait til I can get to my dvom at work to test for continuity. Anyone else ever have this problem?