Rough country: good, Bad, Maybe..?
#13
Like a level spacer? I've got a 2.5" already on mine, it claims you can fit 35's, but i didn't really believe it at first ha. But i'll probably just end up stickin with my level kit and throwing on 35's. At least til i get a raise at work so i can get a suspesion lift.
#14
I ran a 325/60/18 and I really liked that tire. I am pretty sure that was the size with my leveling kit. I do agree though 35s seem a bit too large with just a leveling kit. Brian and Trents truck looks good but they have BFGs which I think run a bit small?
#15
yeah the BFGs are 34.6 i do believe ar rounds about that
#16
The BFGs do run on the smaller side, width and sidewall lugs too. I know I've mentioned before, but I had Toyo M/Ts on order until I found out that the wider sidewall lugs wouldn't clear the upper control arm. With the BFGs I can barely still my finger between the sidewall and the upper control arm. There is also very little clearance between the fender and the tire when turning (1/2"?), so it only works with stock wheels.
Most 285s and 305s, hell even 325s in a shorter 33" height will work on 9" wide wheels with 4.5" backspacing. So I guess it depends on what you're going for.
Most 285s and 305s, hell even 325s in a shorter 33" height will work on 9" wide wheels with 4.5" backspacing. So I guess it depends on what you're going for.
#17
The BFGs do run on the smaller side, width and sidewall lugs too. I know I've mentioned before, but I had Toyo M/Ts on order until I found out that the wider sidewall lugs wouldn't clear the upper control arm. With the BFGs I can barely still my finger between the sidewall and the upper control arm. There is also very little clearance between the fender and the tire when turning (1/2"?), so it only works with stock wheels.
Most 285s and 305s, hell even 325s in a shorter 33" height will work on 9" wide wheels with 4.5" backspacing. So I guess it depends on what you're going for.
Most 285s and 305s, hell even 325s in a shorter 33" height will work on 9" wide wheels with 4.5" backspacing. So I guess it depends on what you're going for.
#18
I don't have a clue. I haven't bought an all terrain tire in 7 years or something so I don't pay attention.
You could check the bfg website and compare tread width and section width. There isn't much on the sidewalls, but the tread seems more square/flat to me than the km2s.
You could check the bfg website and compare tread width and section width. There isn't much on the sidewalls, but the tread seems more square/flat to me than the km2s.